Walther PPQ M2 Review

Clear the pistol then drop the striker by pulling the trigger. This is the only stock trigger which has managed to catch me off guard once while firing off-hand. In some cases the left-handed controls are harder to operate as wel


I don’t know how they did it, and I really don’t care, but the Walther’s trigger is leaps and bounds ahead of the pistol I carried in the field. Striker-fired pistols have always had one drawback; the trigger. In the accuracy department, the Walther PPQ M2 should outperform most pistols in its class. The sights won’t rust because they’re polymer as is the pistol’s frame so nothing to really worry about there. In the field I carried a polymer framed duty pistol for nine year


Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. Pull the slide back slightly then pull down on a tab just in front of the trigge


There are several different versions of this pistol currently available. Some models can be found in various Cerakote finishes too. These grips feel so natural and fit my hands so exactly with the medium back panel that I can’t think of anything darkpistols.com I would want changed.
The Range Hou


The trigger itself has a safety lever in the center ala Glock (to prevent against accidental discharges if dropped), and the pistol has a firing pin block safety as well. I walked into my local gun store to use the range, and an employee said to me, "Hey, have you checked out the new striker-fired Walther?  It has the best factory trigger of any striker-fired gun I've ever shot." From time to time I am introduced to a new pistol design at some invitation-only, pre-production rollout event. I sincerely hope that these guns see an increase in third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. I own one of these as well and to be honest it’s given me a lot of troubl


Clear the pistol then drop the striker by pulling the trigger. This is the only stock trigger which has managed to catch me off guard once while firing off-hand. In some cases the left-handed controls are harder to operate as well.
Get a Full Yearof Guns & Ammo& Digital Acces


Whatever engineering feat Walther undertook to create this trigger had been worth the trouble. But there is so much more to this gun than looking incredible in a mirror. Something which was comfortable, easy to use, not too expensive, and (this is a big thing for me and my budding OCD-ness here) had symmetrical controls. Get the top Handguns stories delivered right to your inbox. Federal's new.30 Super Carry pistol cartridge offers the equivalent of 9mm Luger performance with recoil and muzzle blast com Springfield's XD-M Elite 3.8 Compact OSP 10mm pistol is the perfect carry companion whether you're facing two- or four-legged
Review: Walther PPQ
Last is the Q5 Match, a slightly tweaked 5″ barreled model which also has adjustable sights and is optic ready and features a distinct blue trigger and lightening cuts within the slide. For as many polymer framed and/or striker-fired pistols are currently on the market (and there are quite darkpistols.com a few!) there is one model which I would give the crown to, hands down and no questions asked. On the upside sights for the Walther P99 will fit the PPQ’s and they are by far the easiest sights to replace on any handgun I have ever see


Nothing is perfect and the PPQ does have its share of ‘ehs,’ but it’s not a big list and it’s mostly matters of personal preference. There’s also a pistol called the ‘Creed’ which has similar frame ergonomics to the PPQ, but it is a completely different breed. The Sub-Compact holds 10 rounds in a flush fit mag but will accept any of the larger capacity mags. The PPQ 22 darkpistols.com can be had with 10 or 12 round mags, both flush-fitting. They can be had with 4″ or 5″ barrels (4.2″ for the .40 models and 4.25″ for the .45) or a 4.6″ threaded barrel. There’s the PPQ SC, their sub-compact model with a greatly reduced grip length and half an inch shaved off of the standard 4″ barrels.
Walther PPQ M2 Revi

Long-Distance Handgun Shooting: How and Why to Take a Long Shot
The Q4 and Q5 models are spared from the ‘low-end’ windage adjustable only sights and Walther’s website has a version of the M2 listed with ‘W/XS F8 night sights’ which look to be darkpistols.com a major improvement. Then there are the polymer sights which come standard on most of the models. For those who prefer a thumb button style mag release there is the PPQ M2 model, which can easily be switched out for left or right handed use. It’s not just a good trigger for a polymer striker-fired pistol, it’s just a really freaking good trigge